Standard SMT&DIP Pogo Pin Catalogue

 DOWNLOAD

Cnomax Standard SMT and DIP Catalogue

Standard Pogo pin product introduction:
...Our standard Pogo pin is divided into two categories, patch type and plug-in type. The patch type is convenient for customersto perform SMT reflow soldering (type code S), and the plug-in type is convenient for customers to plug-in wave soldering or manual soldering (type code D);
...The total height of the product is 2.8mm~11.0mm (plug-in type excluding the tail length), integrating all the different usagemethods and usage scenarios of the product. The tube body length is 2.5mm~7.5mm to meet different space installations;
...The product tube body has a card position, which is convenient for the pogo pin to be interference fit with the plastic material or the Molding structure reliability is enhanced without affecting other proceCN-usage methods;:
...The surface coating can be customized according to the different usage environments and requirements of the customer;
...Both the patch type and the plug-in type can be taped and packaged;
...Our company has many types of standard products. If they still cannot meet the needs, you can choose to customize.

NOTE:
1.Material:
Plunger: Lead Free Copper
Barrel: Lead Free Copper
Spring: SUS304.
2.Surface treatment:
Plunger: Plating 5u"Au Min over 50~100u"Ni
Barrel: Plating 5u"Au Min over 50~100u"Ni
Spring: No need plating treatment
3.Electrical:
Rated current & voltage: DC24V 2.0A Max
Contact resistance:50mΩ max At working height (quiescence)
4.Environment:
Temperature range:-55°C~+125°C.
Humidity range:10%RH to 90%RH
5.RoHS Compliance: RoHS&ReachCompliant product.
6.Durability: 10000 cycles Min
7.In order to achieve the best performance,Pleaseuse it in the working height range.
and do not exceed the defined stroke within the defined working height.
PS:Ifyou need change any product data,pleasecontact us : [email protected]
Our company has many types of standard products. If they still cannot meet the needs, you can choose to customize.